Cold room and storage chambers are delivered as a complete package of PUF panels, door with accessories and refrigeration units.
Ice Make has an adequate infrastructural facilities to produce the highly durable thermal insulated PUF panel with thickness of 60 mm to 150 mm as per demand and requirement.
Our most durable PUF panel is high energy saving owing of high thermal insulation, easy to assemble and dismantle due to long lasting cam-lock systems for an ideal arrangement of walls, corners, ceilings, floor and door frames even wall to ceiling cam-lock joints can be an added advantage to ensure ideal design of modular cold rooms & storages.
Cold Room PUF Panel
Technical Specifications Of Puf Panels
- THICKNESS : 60, 80, 100, 125 & 150 mm
- SURFACE MATERIAL Gl Pre-Painted Sheet, S.S. Sheet (Grade 304/316 & Surface Finish 2B & Mate), GI Plain Sheet, Plain Galvanize Iron. (Inside & Outside different metal can be placed as per your requirement).
- FLOOR :
(A) For Kota stone or Concrete floor, Puf Slab with both side tar felt coated.
(B) For Kota stone or Concrete floor, both side metal surface panel in which each side fits with camlock and prevent temperature loss.
(C) Aluminium Chequered Plate with Marine Ply.
(D) FRP Cladding on floor
- ROOM SIZE :
(A) Length & Width Minimum 1.78 mt and Bigger size 0.146 mt in multiples as per requirement
(B) Standard Height for 60 mm thickness 2.47 mt, 80 mm-2.51 mt,100 mm-2.55 mt, 125 mm-2.60 mt, 150 mm-2.65 mt. Single Panel Height upto 12 mt and above as per your requirement.
- DOOR :
(A) Flush Type : Swing Door with FRP Profile, Imported Hardware, Push Type Gasket & replaceable heater for easy door operation & long life.
Opening Size : 24″x72″,30″x72″,34″x78″,46″x84″ (Door Opening W x H)
(B) Overlap Type: Teak wood frame with metal covering by using heavy duty hardware for better strength
Size : 45″x84″,49″x84″,54″x84″, 60″x90″ (Door Opening W x H)
(C) Sliding Door : Ice Make Sliding Doors are delivered as complete units, easy to mount with all fittings, sliding rail and bottom guide roller etc.
Width : 1000/1200/1500/1800 mm
Height : 2100 to 3000 mm
Thickness : 80 mm
|1||Average PUF Density||40 ± 2 Kg/ cu.mtr/ m³|
|2||PUF Blowing Agent||141B (CFC free)|
|3||Insulation Material||Polyurethane foam|
|4||Temperature range||+90°C to -60°C|
|5||Penal Type||Discontinuous type with cam lock|
|6||M.O.C. Of Cam Locks||Cam locks body material HIPS and male latch is made of nylon Glass field with GI sheet reinforcement.
Cam-lock panel joints easy assembly and leakage resistant, panel-to-panel joints.
|7||Type Of Panel Joints||Tongue & Groove Joint with Cam lock and all side rubber gaskets|
|8||Corner Panel Available||12” X 12” X 162”(Maximum Length)|
|9||Length of wall & ceiling panel||2032 mm to 12000 mm 80” to 472.5” inch|
|10||Ceiling Suspension items with specs||MS bolt with thermal breaking cap
PVC Round Plate 6 mm thickness x 90 mm diameter
Aluminium/MS washer plate for load distribution
Anchor bolt (MS) hanging bolt with 40 mm washer 2.0 mm thickness
Sealing to panel MS road Clamp with an insulated crown
|11||Closed cell content||90 to 95%|
|13||Water Absorption||Less than 2%|
|14||Fire Resistance||FR Grade B2 (Fire Resistance Grade)|
|15||Compressive Strength at 10% Deformation||0.21 N/ sq.mm (For PUF only)|
|16||Tensile Strength||0.58 N/ sq.mm (For PUF only)|
|17||Adhesive Strength(Foam to Sheet)||2.9kg/sq.mtr|
|18||Panel Facing Availability||With Rib or plain on Demand (Ribs are provided for more strength)|
|19||Wall & Celling Panel Facing material||Pre Painted Galvanised sheet, Thickness 0.45mm
Plain Galvanised sheet, Thickness 0.45mm
S.S. sheet, Grade 316, 0.50mm finish 2B/ 0.6mm mate No.4
S.S sheet, Grade 304, 0.50mm finish 2B/ 0.6mm mate No.4
|20||Floor Panel Facing Material||• PUF Panel with both side tarfelt sheet.
• PUF Panel with both side 0.45mm GIPP sheet.
• PUF Panel with outside GIPP sheet, inside 9 mm thick marine ply with 2 mm thick Aluminium Chequered Plate
|21||Specification for Colour Coating||A. RAL No.: 9002/9003 or it’s nearest
B. Indian Standard Code
Colour Coating: IS 14246 Galvanizing : IS 277 Base Metal : IS 513
C. Organic Coating: Type RMP (Polyester)
D. Zinc Coating : 120 GSM
E. Top Primer (Thickness in micron ‘μ’): 5 +/- 1 μ
F. Top Coat (Thickness in micron ‘μ’): 20 +/- 1 μ
G. Back Primer (Thickness in micron ‘μ’): 4 +/- 1 μ
H. Back Coat (Thickness in micron ‘μ’): 4 +/- 1 μ
I. Guard Film (Thickness in micron ‘μ’):40 +/- 3 μ
J. Salt Spray Test /Humidity Test: 750 hrs. /1000 hrs.
Cold Room Accessories
Flush Type Big Door
Flush type door with PVC profile, push type gasket & replicable electrical wire heater for easy door operation.
Ice Make’s Sliding Doors are very easy to operate, greater in efficiency, better in performance. Also, In terms of safety, long service Life and smooth in operation every day.
12″ x 12″ View port with three layer argon filled toughen glass which can be visible up to 2°C inside the cold room.
Different size hatch window with heavy frame for easy material movement in high turnover ice cream and dairy industries.
Semi-transparent PVC strip curtain for negative temperature application to prevent heat loss and ultimately the power.
Tru-action pressure ventilator with/without heater to balance pressure and vacuum inside cold room.
Ramps for easy & effortless trolley movement without damaging door frame.